CAD (0) ▾
  • Cart is empty
  1. Request CAD files
This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.
Request Information
Unit of Measure

Key Dimensions

Cone Part Number

 N/A 479

Cup Part Number

 N/A 472A

Bore (d)

 N/A 2.625 in66.675 mm

O.D. (D)

 N/A 4.7244 in120 mm

Design Unit

 N/A Inch

Width (T)

 N/A 1.1418 in29.002 mm
Dynamic Radial Load Rating - 90M Revs (C90) 1 N/A 8360 lbf37200 N
Dynamic Radial Load Rating - 1M Revs (C1) 2 N/A 32200 lbf143000 N

Static Radial Load Rating (C0)

 N/A 41900 lbf186000 N
K Factor 3 N/A 1.52
e Factor 4 N/A 0.38
Y Factor 5 N/A 1.56

Cage Material

 N/A Stamped Steel

Other Dimensions

Inner Ring Width (B)

 N/A 1.142 in29.007 mm

Outer Ring Width (C)

 N/A 0.9230 in23.444 mm

T1 - Total Width

 N/A 1.2720 in32.418 mm
Max Shaft Fillet Radius6 N/A 0.09 in2.3 mm
Max Housing Fillet Radius7 N/A 0.13 in3.3 mm

Shaft Backing Shoulder Diameter - Frontface (da)

 N/A 2.91 in74 mm

Shaft Backing Shoulder Diameter - Backface (db)

 N/A 3.07 in78 mm

Housing Backing Shoulder Diameter - Backface (Db)

 N/A 4.17 in105.92 mm
Effective Center Location8 N/A -0.16 in-4.1 mm

Weight

 N/A 3.08 lb1.41 Kg

Ratings

Ca90 - Dynamic Thrust Rating (90 million revolutions)9 N/A 5500 lbf24500 N

Factors

Y1 Factor 10 N/A 1.75
Y2 Factor 11 N/A 2.61

G1 Factor

 N/A 77.2

G2 Factor

 N/A 23
Geometry Factor (Cg)12 N/A 0.108
  • 1 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 2 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 4 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 These maximum fillet radii will be cleared by the bearing corners.
  • 7 These maximum fillet radii will be cleared by the bearing corners.
  • 8 Negative value indicates effective center inside cone backface.
  • 9 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 10 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 11 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 12 Geometry constant for Lubrication Life Adjustment Factor a3l.