Part Number CSA-TRB-2 7/16, Type CSA Cartridge Mounted Bearings On The Timken Company

CAD (0) ▾

All Product Types > ENGINEERED BEARINGS > Mounted Bearings > Self-Aligning Mounted Tapered Roller Bearings > Type CSA Mounted Tapered Roller Bearings > Type CSA Cartridge Mounted Bearings > Part Number CSA-TRB-2 7/16

Request Information

Unit of Measure

Key Dimensions | Other Dimensions | Radial and Thrust Factors; Speed and Slip-Fit Load Limits

Key Dimensions

Shaft Size	N/A 2.4375 in
Shaft Size Type	N/A Imperial
Housing Type	N/A Cartridge

Other Dimensions

Dimension B	N/A 4 in101.6 mm
Dimension A	N/A 2-7/8 in73 mm
Dimension d₁	N/A 3 15/16 in100 mm
Dimension C	N/A 27/32 in21.4 mm
Dimension E	N/A 4 9/16 in115.9 mm
Dimension K	N/A 4.781 in121.44 mm
Dimension M	N/A 2 7/8 in73 mm
Dimension H	N/A 21/32 in16.7 mm

Radial and Thrust Factors; Speed and Slip-Fit Load Limits

e	N/A 0.40
X (if F_a/F_r ≤ e)	N/A 0.87
Y (if F_a/F_r ≤ e)	N/A 2.17
X (if F_a/F_r > e)	N/A 0.7
Y (if F_a/F_r > e)	N/A 2.63
K Factor	N/A 1.51
C₉₀ Dynamic Load Rating¹	N/A 11600 lbf
C₀ Static Load Rating	N/A 54000 lbf
F_a-max Maximum Permissible Thrust Load²	N/A 3454 lbf
F_r-max Maximum Allowable Slip Fit Radial Load³	N/A 9500 lbf
Max. Speed⁴	N/A 2420 rpm

¹ C₉₀ is the Dynamic Load Rating based on a rated Life of 90 million revolutions (3000 hrs at 500 RPM).
² F_a-max is based on the limits of the holding force of two properly tightened collars and set screws. Fifty percent of the values should be used when a single collar is installed.
³ If the application loads approach or exceed F_r-max, the shaft fit should be adjusted to a line-to-line (g6 or h6) or light press fit (m6).
⁴ Timken Double Lip Seal