The Timken Company
The Timken Company
4500 Mt Pleasant St. NW
N. Canton, OH 44720
Phone: (234) 262-3000
E-Mail: CustomerCAD@timken.com • Web site: www.timken.com
Print Back
  • Clearance fit suggested for outer ring when housing is stationary relative to load.
  • Tight transition fit suggested if housing rotates relative to load.
  • Consult your Timken representative for oscillating applications (e.g., low radial-clearance concerns).
  • Unmarked end of outer ring should be assembled against housing shoulder to clear maximum allowed housing fillet (ras max).
  • Meets Military Standard MS 51961.
Unit of Measure

Key Dimensions

Shaft Diameter (Fw)

 N/A 95.25 mm3.75 in

O.D. (D)

 N/A 120.65 mm4.75 in

Width (C)

 N/A 50.8 mm2.0000 in
Dynamic Radial Load Rating - 1M Revs (C1)1 N/A 193000 N43300 lbf

Other Dimensions

Max Housing Fillet Radius LF OD

 N/A 0.1 in2.540 mm

Max Housing Fillet Radius RF OD

 N/A 0.1 in2.540 mm

Ratings

Static Radial Load Rating (C0)

 N/A 398000 N89400 lbf

Thermal Speed Ratings - Oil

 N/A 3700 rpm

Thermal Reference Speed - Grease 

 N/A 3300 rpm

Factors

Geometry Factor (Cg) 2 N/A 0.1011

Mounting Data

Max. Mounting Dimensions Clearance Fit 1

 N/A 95.25 mm3.75 in

Min. Mounting Dimensions Clearance Fit 1

 N/A 95.227 mm3.7491 in

Max. Mounting Dimensions Clearance Fit 2

 N/A 120.691 mm4.7516 in

Min. Mounting Dimensions Clearance Fit 2

 N/A 120.650 mm4.750 in

Max. Mounting Dimensions Tight Transition Fit S

 N/A 3.7487 mm95.217 in

Min. Mounting Dimensions Tight Transition Fit S

 N/A 95.192 mm3.7477 in

Max. Mounting Dimensions Tight Transition Fit H

 N/A 120.594 mm4.7478 in

Min. Mounting Dimensions Tight Transition Fit H

 N/A 120.635 mm4.7494 in

Shoulder Diameter Da

 N/A 111.13 mm4.375 in

Sub Assembly Part Numbers

Used with Inner Ring Designation

 N/A IR-506032 IR-526032
  • 1 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 2 Cg factor for bearing without inner ring.