Part Number 232/560KYMBW906A, Spherical Roller Bearings

Longer bearing life achieved from higher capacity (vs. competitors)
Longer lubrication life achieved from lower operating temperatures due to reduced internal friction and running torque from cage guided rollers
Better contaminant purging from slots on cage face helps extend bearing life
Greater fatigue strength and increased wear resistance provide tougher protection against shock and acceleration loading from a brass cage

Unit of Measure

Key Dimensions | Other Dimensions | Ratings | Factors

Bore (d)	N/A 560 mm
O.D. (D)	N/A 1030 mm40.551 in
Width (B)	N/A 365 mm14.3700 in
Dynamic Radial Load Rating - 1M Revs (C1)	N/A 13200000 N2960000 lbf
e Factor ¹	N/A 0.35
UPC Code	N/A 087796191310

Max Shaft Fillet Radius²	N/A 7 mm0.280 in
Shaft Backing Shoulder Diameter	N/A 661.000 mm26.000 in
Housing Backing Shoulder Diameter	N/A 918.000 mm36.0000 in
Design Unit	N/A Metric
Bore_Taper	N/A 1/12
Cage Type	N/A YMB
Cage Material	N/A Brass

Static Radial Load Rating (C0)	N/A 22300000 N5020000 lbf
Thermal Reference Speed - Oil ³	N/A 220 rpm
Thermal Reference Speed - Grease	N/A 210 rpm

¹ These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
² Maximum housing fillet radius that bearing corners will clear.
³ See thermal speed ratings in the engineering section.
⁴ These factors apply for both inch and metric calculations. See engineering
⁵ These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
⁶ These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
⁷ Geometry constant for Lubrication Life Adjustment Factor a3l.

Bore (d)