Part Number 23268KYMBW906A, Spherical Roller Bearings

Longer bearing life achieved from higher capacity (vs. competitors)
Longer lubrication life achieved from lower operating temperatures due to reduced internal friction and running torque from cage guided rollers
Better contaminant purging from slots on cage face helps extend bearing life
Greater fatigue strength and increased wear resistance provide tougher protection against shock and acceleration loading from a brass cage

Unit of Measure

Key Dimensions | Other Dimensions | Ratings | Factors

Bore (d)	N/A 340 mm
O.D. (D)	N/A 620 mm24.409 in
Width (B)	N/A 224 mm8.8190 in
Dynamic Radial Load Rating - 1M Revs (C1)	N/A 5160000 N1160000 lbf
e Factor ¹	N/A 0.35
UPC Code	N/A 087796191570

Max Shaft Fillet Radius²	N/A 5 mm0.200 in
Shaft Backing Shoulder Diameter	N/A 399.000 mm15.7000 in
Housing Backing Shoulder Diameter	N/A 554.000 mm21.8000 in
Design Unit	N/A Metric
Bore_Taper	N/A 1/12
Cage Type	N/A YMB
Cage Material	N/A Brass

Static Radial Load Rating (C0)	N/A 8200000 N1840000 lbf
Thermal Reference Speed - Oil ³	N/A 480 rpm
Thermal Reference Speed - Grease	N/A 450 rpm

¹ These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
² Maximum housing fillet radius that bearing corners will clear.
³ See thermal speed ratings in the engineering section.
⁴ These factors apply for both inch and metric calculations. See engineering
⁵ These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
⁶ These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
⁷ Geometry constant for Lubrication Life Adjustment Factor a3l.

Bore (d)