The Timken Company
The Timken Company
4500 Mt Pleasant St. NW
N. Canton, OH 44720
Phone: (234) 262-3000
E-Mail: CustomerCAD@timken.com • Web site: www.timken.com
Print Back
Unit of Measure

Other Dimensions

Weight

 N/A 13.51 Kg29.80 lb

Width (T)

 N/A 3.75 in95.25 mm

B - Width

 N/A 3 3/4 in95.25 mm
Max Shaft Fillet Radius1 N/A 0.03 in0.8 mm
Max Housing Fillet Radius2 N/A 0.13 in3.3 mm

Shaft Backing Shoulder Diameter - Backface (db)

 N/A 5.94 in151 mm

Housing Backing Shoulder Diameter - Frontface (Da)

 N/A 7.76 in197.1 mm

Key Dimensions

Cone Part Number

 N/A 797

Cup Part Number

 N/A 792

Related Assembly Number(s)

 N/A 797-902A1 797-902A2

Outer Spacer Part Number

 N/A Y4S-792

Design Unit

 N/A Inch

Bore (d)

 N/A 5.1181 in130 mm

O.D. (D)

 N/A 8.125 in206.375 mm
Dynamic Radial Load Rating - 90M Revs (C90) 3 N/A 22000 lbf98000 N
Dynamic Radial Load Rating 2-Row - 90M Revs (C90-2row)4 N/A 38400 lbf171000 N
K Factor 5 N/A 1.27
e Factor 6 N/A 0.46

Ratings

C1 - Dynamic Radial Rating (1 million revolutions)7 N/A 148000 lbf658000 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)8 N/A 17300 lbf77000 N

Factors

Y1 Factor 9 N/A 1.47
Y2 Factor 10 N/A 2.19
  • 1 These maximum fillet radii will be cleared by the bearing corners.
  • 2 These maximum fillet radii will be cleared by the bearing corners.
  • 3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 7 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 8 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 10 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.