The Timken Company
The Timken Company
4500 Mt Pleasant St. NW
N. Canton, OH 44720
Phone: (234) 262-3000
E-Mail: CustomerCAD@timken.com • Web site: www.timken.com
Print Back
Unit of Measure

Other Dimensions

Weight

 N/A 14.43 Kg31.79 lb

Width (T)

 N/A 3.9867 in101.262 mm

C - Width

 N/A 3.2387 in82.263 mm
Max Shaft Fillet Radius1 N/A 0.12 in3.050 mm
Max Housing Fillet Radius2 N/A 0.04 in1.0 mm

Shaft Backing Shoulder Diameter - Backface (db)

 N/A 8.11 in206 mm

Housing Backing Shoulder Diameter - Frontface (Da)

 N/A 9.93 in252.22 mm

Key Dimensions

Cone Part Number

 N/A JM738249

Cup Part Number

 N/A JM738210

Inner Spacer Part Number

 N/A M738249XB

Outer Spacer Part Number

 N/A M738210ES

Design Unit

 N/A Metric

Bore (d)

 N/A 7.4803 in190 mm

O.D. (D)

 N/A 10.2362 in260 mm
Dynamic Radial Load Rating - 90M Revs (C90) 3 N/A 23700 lbf105000 N
Dynamic Radial Load Rating 2-Row - 90M Revs (C90-2row)4 N/A 41300 lbf184000 N
K Factor 5 N/A 1.22
e Factor 6 N/A 0.48

Ratings

C1 - Dynamic Radial Rating (1 million revolutions)7 N/A 159000 lbf708000 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)8 N/A 19400 lbf86200 N

Factors

Y1 Factor 9 N/A 1.41
Y2 Factor 10 N/A 2.11
  • 1 These maximum fillet radii will be cleared by the bearing corners.
  • 2 These maximum fillet radii will be cleared by the bearing corners.
  • 3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 7 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 8 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 10 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.