The Timken Company
The Timken Company
4500 Mt Pleasant St. NW
N. Canton, OH 44720
Phone: (234) 262-3000
E-Mail: CustomerCAD@timken.com • Web site: www.timken.com
Print Back
Unit of Measure

Other Dimensions

Weight

 N/A 1.26 Kg2.77 lb

Width (T)

 N/A 54 mm2.126 in

C - Width

 N/A 43.491 mm1.7122 in
Max Shaft Fillet Radius1 N/A 5.080 mm0.2 in
Max Housing Fillet Radius2 N/A 0.5 mm0.02 in

Shaft Backing Shoulder Diameter - Backface (db)

 N/A 75 mm2.95 in

Housing Backing Shoulder Diameter - Frontface (Da)

 N/A 91.9 mm3.62 in

Key Dimensions

Cone Part Number

 N/A JLM508748

Cup Part Number

 N/A JLM508710

Inner Spacer Part Number

 N/A LM508748XS

Outer Spacer Part Number

 N/A LM508710ES

Snap Ring Part Number

 N/A K518779R

Design Unit

 N/A Metric

Bore (d)

 N/A 60 mm2.3622 in

O.D. (D)

 N/A 95 mm3.7402 in
Dynamic Radial Load Rating - 90M Revs (C90) 3 N/A 25300 N5690 lbf
Dynamic Radial Load Rating 2-Row - 90M Revs (C90-2row)4 N/A 44000 N9900 lbf
K Factor 5 N/A 1.45
e Factor 6 N/A 0.4

Ratings

C1 - Dynamic Radial Rating (1 million revolutions)7 N/A 170000 N38200 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)8 N/A 17400 N3910 lbf

Factors

Y1 Factor 9 N/A 1.68
Y2 Factor 10 N/A 2.5
  • 1 These maximum fillet radii will be cleared by the bearing corners.
  • 2 These maximum fillet radii will be cleared by the bearing corners.
  • 3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 7 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 8 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 10 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.