The Timken Company
The Timken Company
4500 Mt Pleasant St. NW
N. Canton, OH 44720
Phone: (234) 262-3000
E-Mail: CustomerCAD@timken.com • Web site: www.timken.com
Print Back
Unit of Measure

Other Dimensions

Weight

 N/A 2.87 Kg6.34 lb

Width (T)

 N/A 65.975 mm2.5974 in

C - Width

 N/A 53.491 mm2.106 in
Max Shaft Fillet Radius1 N/A 3.050 mm0.12 in
Max Housing Fillet Radius2 N/A 0.8 mm0.03 in

Shaft Backing Shoulder Diameter - Backface (db)

 N/A 98 mm3.86 in

Housing Backing Shoulder Diameter - Frontface (Da)

 N/A 125 mm4.96 in

Key Dimensions

Cone Part Number

 N/A JM716649

Cup Part Number

 N/A JM716610

Inner Spacer Part Number

 N/A M716649XS

Outer Spacer Part Number

 N/A M716610ES

Snap Ring Part Number

 N/A K523970R

Design Unit

 N/A Metric

Bore (d)

 N/A 85 mm3.3465 in

O.D. (D)

 N/A 130.000 mm5.1181 in
Dynamic Radial Load Rating - 90M Revs (C90) 3 N/A 41800 N9400 lbf
Dynamic Radial Load Rating 2-Row - 90M Revs (C90-2row)4 N/A 72800 N16400 lbf
K Factor 5 N/A 1.31
e Factor 6 N/A 0.44

Ratings

C1 - Dynamic Radial Rating (1 million revolutions)7 N/A 281000 N63100 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)8 N/A 31800 N7150 lbf

Factors

Y1 Factor 9 N/A 1.52
Y2 Factor 10 N/A 2.26
  • 1 These maximum fillet radii will be cleared by the bearing corners.
  • 2 These maximum fillet radii will be cleared by the bearing corners.
  • 3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 7 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 8 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 10 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.