The Timken Company
The Timken Company
4500 Mt Pleasant St. NW
N. Canton, OH 44720
Phone: (234) 262-3000
E-Mail: CustomerCAD@timken.com • Web site: www.timken.com
Print Back
TDI bearings have a one-piece double inner race and two single outer races and are typically supplied complete with an outer race spacer as a pre-set assembly. The bearing can be used at fixed positions on rotation shaft applications. For rotating housing application it can be used to float on the stationary shaft.
Unit of Measure

Other Dimensions

Weight

 N/A 61.8 Kg136.3 lb

Inner Ring Width (B)

 N/A 5.3125 in134.938 mm
Max Shaft Fillet Radius1 N/A 0.13 in3.3 mm

Shaft Backing Shoulder Diameter - Frontface (da)

 N/A 12.91 in328 mm

Cage Location Relative to Frontface (Ab) 

 N/A -0.02 in-0.5 mm

Key Dimensions

Series

 N/A 129000

Cone Part Number

 N/A EE129123D

Bore (d)

 N/A 12.0079 in305.001 mm
Dynamic Radial Load Rating - 90M Revs (C90) 2 N/A 52200 lbf232000 N
Dynamic Radial Load Rating - 1M Revs (C1) 3 N/A 201000 lbf896000 N
Dynamic Radial Load Rating 2-Row - 90M Revs (C90-2row) 4 N/A 91000 lbf405000 N
K Factor 5 N/A 1.4

Note

 N/A This part has a non-standard shoulder design. Please email customer CAD for shoulder details to ensure the proper design of mating components.

Ratings

C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)6 N/A 351000 lbf1560000 N

Static Radial Load Rating (C0)

 N/A 401000 lbf1780000 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)7 N/A 37200 lbf165000 N

Factors

Geometry Factor (Cg)8 N/A 0.171
  • 1 These maximum fillet radii will be cleared by the bearing corners.
  • 2 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 3 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 7 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 8 Geometry constant for Lubrication Life Adjustment Factor a3l.