The Timken Company
The Timken Company
4500 Mt Pleasant St. NW
N. Canton, OH 44720
Phone: (234) 262-3000
E-Mail: CustomerCAD@timken.com • Web site: www.timken.com
Print Back
TDI bearings have a one-piece double inner race and two single outer races and are typically supplied complete with an outer race spacer as a pre-set assembly. The bearing can be used at fixed positions on rotation shaft applications. For rotating housing application it can be used to float on the stationary shaft.
Unit of Measure

Other Dimensions

Weight

 N/A 19.300 Kg42.6 lb

Inner Ring Width (B)

 N/A 4.75 in120.65 mm
Max Shaft Fillet Radius1 N/A 0.06 in1.5 mm

Shaft Backing Shoulder Diameter - Frontface (da)

 N/A 5.98 in152 mm

Cage Location Relative to Frontface (Ab) 

 N/A 0.14 in3.6 mm

Key Dimensions

Series

 N/A H228600

Cone Part Number

 N/A H228649D

Bore (d)

 N/A 5.375 in136.525 mm
Dynamic Radial Load Rating - 90M Revs (C90) 2 N/A 37700 lbf168000 N
Dynamic Radial Load Rating - 1M Revs (C1) 3 N/A 145000 lbf647000 N
Dynamic Radial Load Rating 2-Row - 90M Revs (C90-2row) 4 N/A 65700 lbf292000 N
K Factor 5 N/A 1.76

Ratings

C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)6 N/A 253000 lbf1130000 N

Static Radial Load Rating (C0)

 N/A 237000 lbf1050000 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)7 N/A 21500 lbf95500 N

Factors

Geometry Factor (Cg)8 N/A 0.136
  • 1 These maximum fillet radii will be cleared by the bearing corners.
  • 2 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 3 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 7 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 8 Geometry constant for Lubrication Life Adjustment Factor a3l.