The Timken Company
The Timken Company
4500 Mt Pleasant St. NW
N. Canton, OH 44720
Phone: (234) 262-3000
E-Mail: CustomerCAD@timken.com • Web site: www.timken.com
Print Back
TDI bearings have a one-piece double inner race and two single outer races and are typically supplied complete with an outer race spacer as a pre-set assembly. The bearing can be used at fixed positions on rotation shaft applications. For rotating housing application it can be used to float on the stationary shaft.
Unit of Measure

Other Dimensions

Weight

 N/A 91.4 Kg201.4 lb

Inner Ring Width (B)

 N/A 6.5625 in166.688 mm
Max Shaft Fillet Radius1 N/A 0.13 in3.3 mm

Shaft Backing Shoulder Diameter - Frontface (da)

 N/A 14.06 in357 mm

Cage Location Relative to Frontface (Ab) 

 N/A 0.25 in6.4 mm

Key Dimensions

Series

 N/A HM261000

Cone Part Number

 N/A HM261049DW

Bore (d)

 N/A 13.125 in333.375 mm
Dynamic Radial Load Rating - 90M Revs (C90) 2 N/A 93200 lbf415000 N
Dynamic Radial Load Rating - 1M Revs (C1) 3 N/A 360000 lbf1600000 N
Dynamic Radial Load Rating 2-Row - 90M Revs (C90-2row) 4 N/A 162000 lbf722000 N
K Factor 5 N/A 1.74

Note

 N/A This part has a non-standard shoulder design. Please email customer CAD for shoulder details to ensure the proper design of mating components.

Ratings

C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)6 N/A 626000 lbf2780000 N

Static Radial Load Rating (C0)

 N/A 777000 lbf3460000 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)7 N/A 53400 lbf238000 N

Factors

G1 Factor

 N/A 3310

G2 Factor

 N/A 324
Geometry Factor (Cg)8 N/A 0.194
  • 1 These maximum fillet radii will be cleared by the bearing corners.
  • 2 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 3 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 7 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 8 Geometry constant for Lubrication Life Adjustment Factor a3l.