The Timken Company
The Timken Company
4500 Mt Pleasant St. NW
N. Canton, OH 44720
Phone: (234) 262-3000
E-Mail: CustomerCAD@timken.com • Web site: www.timken.com
Print Back
This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.
Unit of Measure

Key Dimensions

Cone Part Number

 N/A EE341048

Bore (d)

 N/A 4.75 in120.65 mm
Dynamic Radial Load Rating - 90M Revs (C90) 1 N/A 29600 lbf132000 N
Dynamic Radial Load Rating - 1M Revs (C1) 2 N/A 114000 lbf508000 N
C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)3 N/A 199000 lbf885000 N
Dynamic Radial Load Rating 2-Row - 90M Revs (C90-2row) 4 N/A 51600 lbf229000 N
K Factor 5 N/A 1.38

Other Dimensions

Inner Ring Width (B)

 N/A 2.3437 in59.530 mm
Max Shaft Fillet Radius6 N/A 0.25 in6.35 mm

Shaft Backing Shoulder Diameter - Frontface (da)

 N/A 5.31 in135 mm

Shaft Backing Shoulder Diameter - Backface (db)

 N/A 5.79 in147 mm

Cage Location Relative to Frontface (Ab) 

 N/A 0.03 in0.76 mm

Cage Location Relative to Backface (Aa)

 N/A 0.36 in9.14 mm
Effective Center Location7 N/A -0.31 in-7.9 mm

Weight

 N/A 24.5 lb11.1 Kg

Ratings

Static Radial Load Rating (C0)

 N/A 140000 lbf622000 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)8 N/A 21500 lbf95600 N

Factors

G1 Factor

 N/A 285.8

G2 Factor

 N/A 43.6
Geometry Factor (Cg)9 N/A 0.117
  • 1 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 2 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 3 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 These maximum fillet radii will be cleared by the bearing corners.
  • 7 Negative value indicates effective center inside cone backface.
  • 8 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 9 Geometry constant for Lubrication Life Adjustment Factor a3l.