The Timken Company
The Timken Company
4500 Mt Pleasant St. NW
N. Canton, OH 44720
Phone: (234) 262-3000
E-Mail: CustomerCAD@timken.com • Web site: www.timken.com
Print Back

Key Features

  • Available in single, double and multi-row configurations, as well as proprietary sizes
  • Designed in collaboration with OE engineers to design, engineer and test bearings for premium performance in many applications
  • Power dense designs allow for heavier loads and can help extend bearing life
  • Optimized internal geometry lowers torque and operating temperatures to extend lubrication system life
  • Can be designed to withstand high-corrosive, high-temperature and vacuum or low-lubrication environments with proprietary enhancements
Unit of Measure

Key Dimensions

Cone Part Number

 N/A X32317

Cup Part Number

 N/A Y32317

Bore (d)

 N/A 85 mm3.3465 in

O.D. (D)

 N/A 180 mm7.0866 in

Width (T)

 N/A 63.5 mm2.5 in
Dynamic Radial Load Rating - 1M Revs (C1) 1 N/A 570000 N128000 lbf
Dynamic Radial Load Rating - 90M Revs (C90) 2 N/A 148000 N33200 lbf
e Factor 3 N/A 0.35
K Factor 4 N/A 1.69

Series

 N/A 32317
Y Factor 5 N/A 1.74

Other Dimensions

Inner Ring Width (B)

 N/A 60.000 mm2.3622 in

Outer Ring Width (C)

 N/A 49.000 mm1.9291 in
Effective Center Location6 N/A -20.8 mm-0.82 in
Max Shaft Fillet Radius7 N/A 4.060 mm0.16 in
Max Housing Fillet Radius8 N/A 3.05 mm0.12 in

Shaft Backing Shoulder Diameter - Frontface (da)

 N/A 103 mm4.06 in

Shaft Backing Shoulder Diameter - Backface (db)

 N/A 112 mm4.41 in

Housing Backing Shoulder Diameter - Frontface (Da)

 N/A 167.89 mm6.61 in

Housing Backing Shoulder Diameter - Backface (Db)

 N/A 161.04 mm6.34 in

Cage Location Relative to Backface (Aa)

 N/A 6.6 mm0.26 in

Cage Location Relative to Frontface (Ab) 

 N/A 6.9 mm0.27 in

Weight

 N/A 7.2 Kg16 lb

Ratings

Dynamic Axial Rating - 90M Revs (Ca90)9 N/A 87200 N19600 lbf

Static Radial Load Rating (C0)

 N/A 588000 N132000 lbf

Factors

G1 Factor

 N/A 205.6

G2 Factor

 N/A 31.5
Geometry Factor (Cg)10 N/A 0.0993
  • 1 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 2 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 4 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 Negative value indicates effective center inside cone backface.
  • 7 These maximum fillet radii will be cleared by the bearing corners.
  • 8 These maximum fillet radii will be cleared by the bearing corners.
  • 9 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 10 Geometry constant for Lubrication Life Adjustment Factor a3l.