Spherical Roller Bearing Metric and Inch Accessories
spherical-roller-bearing-metric-inch-accessories
 Metric H Adapter Sleeve(126)
* Adapters with a C1 dimension use a lockplate as the locking device as shown in the illustration; otherwise, a lockwasher is used as the locking device. /Asset/HU_Acc_H2305-Sleeve-Tapered-Sleeve-Adapter-Assembly-A-2.jpg  Metric AH Withdrawal Sleeve(148)
 Metric HMV Hydraulic Nut(88) Introduction
Description
 Metric AOH Hydraulic Withdrawal Sleeve(137)
 Metric HA Adapter Sleeve for Inch Shaft(63)
 Metric HE/HS Adapter Sleeve for Inch Shaft(62)
 Metric OH Hydraulic Adapter Sleeve(118)
 Inch Accessories - Locknut and Lockwasher(26)
 Inch Accessories - Locknut and Lockplate(25)
 Push-Type Removable Sleeve, Locknut and Lockwasher(48) The chart below shows dimensions for adapter assemblies and components used in the tapered bore bearings on shafts.Components are ordered seperately. /Asset/Push-Type-Removable-Sleeve--Locknut-and-Lockwasher.jpg  SNW/SNP – Pull-Type Sleeve, Locknut, Lockwasher/Lockplate Assemblies(294)
 Inch HMVC Hydraulic Nut(46) HMVC-10 through HMVC-64 have American National Threads Class 3.HMVC-68 through HMVC-190 have Acme General Purpose Threads Class 3G. /Asset/timken-hydraulic-nut-with-black-oxide-coating-HMV34.png  Inch DUSTAC™ Shaft Seal(30)
 Inch Sine Bar Gage(10)
 Inch TTU Take-Up Unit(33)
Note: Speed ratings are found in dimension tables in the spherical roller bearing section. /Asset/Inch-TTU-Take-Up-Unit.jpg  Inch TU Take-Up Unit(35)
|
Follow us on: 
© 2016 The Timken Company.
© 2016 The Timken Company.