Advanced Search On The Timken Company

Unit of Measure

Key Dimensions

Cone Part Number
Cup Part Number
Inner Spacer Part Number
Outer Spacer Part Number
Bore (d) (in)	At Least : No More Than : Available Range: 0.5901 to 3.5
Bore (d) (mm)	At Least : No More Than : Available Range: 14.989 to 88.9
O.D. (D) (in)	At Least : No More Than : Available Range: 1.3775 to 4.9375
O.D. (D) (mm)	At Least : No More Than : Available Range: 34.989 to 125.413
Dynamic Radial Load Rating - 90M Revs (C90) (lbf) ¹	At Least : No More Than : Available Range: 767 to 9730
Dynamic Radial Load Rating - 90M Revs (C90) (N) ²	At Least : No More Than : Available Range: 3410 to 43300
Dynamic Radial Load Rating 2-Row - 90M Revs (C90-2row) (lbf) ³	At Least : No More Than : Available Range: 1330 to 16900
Dynamic Radial Load Rating 2-Row - 90M Revs (C90-2row) (N) ⁴	At Least : No More Than : Available Range: 5940 to 75400
e Factor ⁵	At Least : No More Than : Available Range: 0.29 to 0.55

Other Dimensions

Width (T) (in)	At Least : No More Than : Available Range: 0.966 to 2.625
Width (T) (mm)	At Least : No More Than : Available Range: 24.536 to 66.675
C - Width (in)	At Least : No More Than : Available Range: 0.7874 to 2.125
C - Width (mm)	At Least : No More Than : Available Range: 20 to 53.975
Max Shaft Fillet Radius (in) ⁶	At Least : No More Than : Available Range: 0.03 to 0.14
Max Shaft Fillet Radius (mm) ⁷	At Least : No More Than : Available Range: 0.8 to 3.6
Max Housing Fillet Radius (in) ⁸	At Least : No More Than : Available Range: 0.03 to 0.09
Max Housing Fillet Radius (mm) ⁹	At Least : No More Than : Available Range: 0.76 to 2.29

Ratings

C1 - Dynamic Radial Rating (1 million revolutions) (lbf) ¹⁰	At Least : No More Than : Available Range: 5150 to 65300
C1 - Dynamic Radial Rating (1 million revolutions) (N) ¹¹	At Least : No More Than : Available Range: 22900 to 291000
C_a90 - Dynamic Thrust Rating (90 million revolutions) (lbf) ¹²	At Least : No More Than : Available Range: 594 to 5650
C_a90 - Dynamic Thrust Rating (90 million revolutions) (N) ¹³	At Least : No More Than : Available Range: 2640 to 25100

Factors

Y1 Factor ¹⁴	At Least : No More Than : Available Range: 1.24 to 2.36
Y2 Factor ¹⁵	At Least : No More Than : Available Range: 1.84 to 3.51

¹ Based on 90 x 10⁶ revolutions L₁₀ life, for The Timken Company life calculation method. C₉₀ and C_a90 are radial and thrust values.
² Based on 90 x 10⁶ revolutions L₁₀ life, for The Timken Company life calculation method. C₉₀ and C_a90 are radial and thrust values.
³ Based on 90 x 10⁶ revolutions L₁₀ life, for The Timken Company life calculation method. C₉₀ and C_a90 are radial and thrust values for a single-row, C₉₀₍₂₎ is the two-row radial value.
⁴ Based on 90 x 10⁶ revolutions L₁₀ life, for The Timken Company life calculation method. C₉₀ and C_a90 are radial and thrust values for a single-row, C₉₀₍₂₎ is the two-row radial value.
⁵ These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
⁶ These maximum fillet radii will be cleared by the bearing corners.
⁷ These maximum fillet radii will be cleared by the bearing corners.
⁸ These maximum fillet radii will be cleared by the bearing corners.
⁹ These maximum fillet radii will be cleared by the bearing corners.
¹⁰ Based on 1 x 10⁶ revolutions L₁₀ life, for the ISO life calculation method.
¹¹ Based on 1 x 10⁶ revolutions L₁₀ life, for the ISO life calculation method.
¹² Based on 90 x 10⁶ revolutions L₁₀ life, for The Timken Company life calculation method. C₉₀ and C_a90 are radial and thrust values for a single-row, C₉₀₍₂₎ is the two-row radial value.
¹³ Based on 90 x 10⁶ revolutions L₁₀ life, for The Timken Company life calculation method. C₉₀ and C_a90 are radial and thrust values for a single-row, C₉₀₍₂₎ is the two-row radial value.
¹⁴ These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
¹⁵ These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.

Clear Cancel Advanced Search

Email ^*
First Name ^*
Last Name ^*
Company ^*
Department ^*
Country ^*
Zip/Postal Code ^*
Phone Number

No Preference
15125
15578
23691
27690
28584
392
39580
39590
399A
A4059
HM88649
L44643
LL217849
LM11749
LM11949
LM29748
LM29749
LM48548
LM501349
LM67048
LM806649
M88048

No Preference
15245
15520
23621
27620
28521
394A
39521
A4138
HM88610
L44610
LL217810
LM11710
LM11910
LM29710
LM48510
LM501310
LM67010
LM806610
M88010

No Preference
K106389R
K106393R
K106398R
K106790R
K106817R
K107061R
K107577R
K107581R
K114294R
K143257R
K147783R
K152757
K326056R
K426891R
K444667R
LL217849XB
LM48548XE
X1S-15125
X1S-15578
X3S-39580
X5S-399A
X5SA4059

No Preference
K106390R
K106397R
K106610R
K106789R
K107087R
K107578R
K107582R
K109519R
K114295R
K143253R
K150486R
K152758
K158879R
K159808R
K326057R
K426892R
K444668R
K524667R
K528895R
XC914-SD