Menu
Batch CAD Cart (0) ▾
  • Cart is empty
  1. Click Here for Batch Download
Request Information Add to CAD Cart
  • Clearance fit suggested for outer ring when housing is stationary relative to load.
  • Tight transition fit suggested if housing rotates relative to load.
  • Consult your Timken representative for oscillating applications (e.g., low radial-clearance concerns).
  • Unmarked end of outer ring should be assembled against housing shoulder to clear maximum allowed housing fillet (ras max).
  • Meets Military Standard MS 51961.
Unit of Measure

Bearing Dimensions

Shaft Diameter (Fw)

 N/A 184.15 mm7.25 in

D - Outer Diameter

 N/A 231.775 mm9.1250 in

Dimension C/B

 N/A 76.2 mm3.0000 in

Specifications

Static Load Rating Co

 N/A 1130000 N253000 lbf
Dynamic Load Rating C11 N/A 524000 N118000 lbf
Geometry Factor Cg2 N/A 0.1586

Thermal Speed Ratings - Oil

 N/A 1800 rpm

Thermal Speed Ratings - Grease

 N/A 1600 rpm

Mounting Data

Chamfer rsmin

 N/A 3.050 mm0.12 in

Max. Mounting Dimensions Clearance Fit 1

 N/A 184.15 mm7.25 in

Min. Mounting Dimensions Clearance Fit 1

 N/A 184.120 mm7.2488 in

Max. Mounting Dimensions Clearance Fit 2

 N/A 231.821 mm9.1268 in

Min. Mounting Dimensions Clearance Fit 2

 N/A 231.775 mm9.125 in

Max. Mounting Dimensions Tight Transition Fit S

 N/A 7.2480 mm184.099 in

Min. Mounting Dimensions Tight Transition Fit S

 N/A 184.069 mm7.2468 in

Max. Mounting Dimensions Tight Transition Fit H

 N/A 231.714 mm9.1226 in

Min. Mounting Dimensions Tight Transition Fit H

 N/A 231.760 mm9.1244 in

Shoulder Diameter Da

 N/A 216.00 mm8.500 in

Sub Assembly Part Numbers

Used with Inner Ring Designation

 N/A IR-9611648
  • 1 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 2 Cg factor for bearing without inner ring.
By clicking Submit, you consent to the personal information you provide being used in the manner as described in our Privacy Notice, including access to that information by Timken personnel who may be located outside your home country. In addition, you agree that the CAD drawings are for your personal, one-time use only, and that you will not modify or create any compilation or derivative work using the CAD drawings or distribute or display the CAD drawings on any website or other media.