Part Number HJ-14817848, 6673M On The Timken Company

CAD (0) ▾

Clearance fit suggested for outer ring when housing is stationary relative to load.
Tight transition fit suggested if housing rotates relative to load.
Consult your Timken representative for oscillating applications (e.g., low radial-clearance concerns).
Unmarked end of outer ring should be assembled against housing shoulder to clear maximum allowed housing fillet (r_{as max}).
Meets Military Standard MS 51961.

Request Information

Unit of Measure

Key Dimensions | Other Dimensions | Ratings | Factors | Mounting Data | Sub Assembly Part Numbers

Key Dimensions

Shaft Diameter (F_w)	N/A 234.95 mm9.25 in
O.D. (D)	N/A 282.575 mm11.125 in
Width (C)	N/A 76.2 mm3.0000 in
Dynamic Radial Load Rating - 1M Revs (C1)¹	N/A 599000 N145000 lbf

Other Dimensions

Max Housing Fillet Radius LF OD	N/A 0.16 in4.060 mm
Max Housing Fillet Radius RF OD	N/A 0.16 in4.060 mm

Ratings

Static Radial Load Rating (C0)	N/A 1350000 N326000 lbf
Thermal Speed Ratings - Oil	N/A 1300 rpm
Thermal Reference Speed - Grease	N/A 1200 rpm

Factors

Geometry Factor (Cg) ²

N/A 0.1885

Mounting Data

Max. Mounting Dimensions Clearance Fit 1	N/A 234.95 mm9.25 in
Min. Mounting Dimensions Clearance Fit 1	N/A 234.920 mm9.2488 in
Max. Mounting Dimensions Clearance Fit 2	N/A 282.626 mm11.1270 in
Min. Mounting Dimensions Clearance Fit 2	N/A 282.575 mm11.125 in
Max. Mounting Dimensions Tight Transition Fit S	N/A 9.2480 mm234.899 in
Min. Mounting Dimensions Tight Transition Fit S	N/A 234.869 mm9.2468 in
Max. Mounting Dimensions Tight Transition Fit H	N/A 282.509 mm11.1220 in
Min. Mounting Dimensions Tight Transition Fit H	N/A 282.560 mm11.1240 in
Shoulder Diameter D_a	N/A 266.70 mm10.500 in

Sub Assembly Part Numbers

Used with Inner Ring Designation

N/A IR-12814848

¹ Based on 1 x 10⁶ revolutions L₁₀ life, for the ISO life calculation method.
² C_g factor for bearing without inner ring.