Montage of Timken Bearing Products
Batch CAD Cart (0) ▾
  • Cart is empty
  1. Click Here for Batch Download
Request Information Add to CAD Cart
  • Clearance fit suggested for outer ring when housing is stationary relative to load.
  • Tight transition fit suggested if housing rotates relative to load.
  • Consult your Timken representative for oscillating applications (e.g., low radial-clearance concerns).
  • Unmarked end of outer ring should be assembled against housing shoulder to clear maximum allowed housing fillet (ras max).
  • Meets Military Standard MS 51961.
Unit of Measure

Bearing Dimensions

Shaft Diameter (Fw)

 N/A 114.30 mm4.50 in

D - Outer Diameter

 N/A 152.400 mm6 in

Dimension C/B

 N/A 57.15 mm2.2500 in

Specifications

Static Load Rating Co

 N/A 517000 N116000 lbf
Dynamic Load Rating C11 N/A 285000 N64000 lbf
Geometry Factor Cg2 N/A 0.1100

Thermal Speed Ratings - Oil

 N/A 3200 rpm

Thermal Speed Ratings - Grease

 N/A 2800 rpm

Mounting Data

Chamfer rsmin

 N/A 2.540 mm0.1 in

Max. Mounting Dimensions Clearance Fit 1

 N/A 114.30 mm4.50 in

Min. Mounting Dimensions Clearance Fit 1

 N/A 114.277 mm4.4991 in

Max. Mounting Dimensions Clearance Fit 2

 N/A 152.441 mm6.0016 in

Min. Mounting Dimensions Clearance Fit 2

 N/A 152.400 mm6.000 in

Max. Mounting Dimensions Tight Transition Fit S

 N/A 4.4986 mm114.264 in

Min. Mounting Dimensions Tight Transition Fit S

 N/A 114.242 mm4.4977 in

Max. Mounting Dimensions Tight Transition Fit H

 N/A 152.344 mm5.9978 in

Min. Mounting Dimensions Tight Transition Fit H

 N/A 152.385 mm5.9994 in

Shoulder Diameter Da

 N/A 138.11 mm5.438 in

Sub Assembly Part Numbers

Used with Inner Ring Designation

 N/A IR-607236
  • 1 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 2 Cg factor for bearing without inner ring.