Montage of Timken Bearing Products
Batch CAD Cart (0) ▾
  • Cart is empty
  1. Click Here for Batch Download
Request Information Add to CAD Cart
  • Clearance fit suggested for outer ring when housing is stationary relative to load.
  • Tight transition fit suggested if housing rotates relative to load.
  • Consult your Timken representative for oscillating applications (e.g., low radial-clearance concerns).
  • Unmarked end of outer ring should be assembled against housing shoulder to clear maximum allowed housing fillet (ras max).
  • Meets Military Standard MS 51961.
Unit of Measure

Bearing Dimensions

Shaft Diameter (Fw)

 N/A 127.00 mm5.00 in

D - Outer Diameter

 N/A 165.1 mm6 1/2 in

Dimension C/B

 N/A 50.8 mm2.0000 in

Specifications

Static Load Rating Co

 N/A 517000 N116000 lbf
Dynamic Load Rating C11 N/A 278000 N62400 lbf
Geometry Factor Cg2 N/A 0.1162

Thermal Speed Ratings - Oil

 N/A 2800 rpm

Thermal Speed Ratings - Grease

 N/A 2400 rpm

Mounting Data

Chamfer rsmin

 N/A 2.540 mm0.1 in

Max. Mounting Dimensions Clearance Fit 1

 N/A 127.00 mm5.00 in

Min. Mounting Dimensions Clearance Fit 1

 N/A 126.975 mm4.9990 in

Max. Mounting Dimensions Clearance Fit 2

 N/A 165.141 mm6.5016 in

Min. Mounting Dimensions Clearance Fit 2

 N/A 165.100 mm6.500 in

Max. Mounting Dimensions Tight Transition Fit S

 N/A 4.9984 mm126.959 in

Min. Mounting Dimensions Tight Transition Fit S

 N/A 126.934 mm4.9974 in

Max. Mounting Dimensions Tight Transition Fit H

 N/A 165.044 mm6.4978 in

Min. Mounting Dimensions Tight Transition Fit H

 N/A 165.085 mm6.4994 in

Shoulder Diameter Da

 N/A 150.81 mm5.938 in
  • 1 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 2 Cg factor for bearing without inner ring.