Menu
Batch CAD Cart (0) ▾
  • Cart is empty
  1. Click Here for Batch Download
Request Information Add to CAD Cart
  • Clearance fit suggested for outer ring when housing is stationary relative to load.
  • Tight transition fit suggested if housing rotates relative to load.
  • Consult your Timken representative for oscillating applications (e.g., low radial-clearance concerns).
  • Unmarked end of outer ring should be assembled against housing shoulder to clear maximum allowed housing fillet (ras max).
  • Meets Military Standard MS 51961.
Unit of Measure

Bearing Dimensions

Shaft Diameter (Fw)

 N/A 127.00 mm5.00 in

D - Outer Diameter

 N/A 165.1 mm6 1/2 in

Dimension C/B

 N/A 57.15 mm2.2500 in

Specifications

Static Load Rating Co

 N/A 590000 N133000 lbf
Dynamic Load Rating C11 N/A 308000 N69200 lbf
Geometry Factor Cg2 N/A 0.1188

Thermal Speed Ratings - Oil

 N/A 2800 rpm

Thermal Speed Ratings - Grease

 N/A 2500 rpm

Mounting Data

Chamfer rsmin

 N/A 2.540 mm0.1 in

Max. Mounting Dimensions Clearance Fit 1

 N/A 127.00 mm5.00 in

Min. Mounting Dimensions Clearance Fit 1

 N/A 126.975 mm4.9990 in

Max. Mounting Dimensions Clearance Fit 2

 N/A 165.141 mm6.5016 in

Min. Mounting Dimensions Clearance Fit 2

 N/A 165.100 mm6.500 in

Max. Mounting Dimensions Tight Transition Fit S

 N/A 4.9984 mm126.959 in

Min. Mounting Dimensions Tight Transition Fit S

 N/A 126.934 mm4.9974 in

Max. Mounting Dimensions Tight Transition Fit H

 N/A 165.044 mm6.4978 in

Min. Mounting Dimensions Tight Transition Fit H

 N/A 165.085 mm6.4994 in

Shoulder Diameter Da

 N/A 150.81 mm5.938 in

Sub Assembly Part Numbers

Used with Inner Ring Designation

 N/A IR-648036 IR-688036
  • 1 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 2 Cg factor for bearing without inner ring.
By clicking Submit, you consent to the personal information you provide being used in the manner as described in our Privacy Notice, including access to that information by Timken personnel who may be located outside your home country. In addition, you agree that the CAD drawings are for your personal, one-time use only, and that you will not modify or create any compilation or derivative work using the CAD drawings or distribute or display the CAD drawings on any website or other media.