Menu
Batch CAD Cart (0) ▾
  • Cart is empty
  1. Click Here for Batch Download
Request Information Add to CAD Cart
  • Ideal choice where the shaft is not practical to use as inner raceway.
  • Designed to meet established inch tolerances.
  • Maximum shaft fillet radius cannot exceed inner-ring bore chamfer as shown.
  • Optional centralized lubrication groove (bore) or through hole available – specify when ordering.
  • Designed to be axially clamped against shoulder for loose transition fit on shaft.
  • After mounting, for tight transition fit (keeping inner ring from rotating relative to shaft), inner-ring O.D. must not exceed raceway diameter on matching bearing.
  • After mounting, if O.D. of inner ring exceeds the required raceway diameter for matching bearing, ring should be ground to proper diameter while mounted on shaft.
  • Unmarked end of inner ring to be assembled against the shaft shoulder to ensure clearing the maximum allowable shaft fillet as indicated in tables shown.
Unit of Measure

Specifications

Shaft Diameter

 N/A 7.500 in

Max. Loose Transition Fit S

 N/A 7.4994 in190.485 mm

Min. Loose Transition Fit S

 N/A 7.4982 in190.454 mm

Max. Interference Fit

 N/A 7.5014 in190.536 mm

Min. Interference Fit

 N/A 7.5006 in190.515 mm

Dimensions

Dimension D

 N/A 7.500 in190.5 mm

Dimension F

 N/A 8-3/4 in222.250 mm

Dimension B

 N/A 3 in76.2 mm

Chamfer rsmin

 N/A 0.16 in4.06 mm

Sub Assembly Part Numbers

Used with Bearing Designation

 N/A HJ-14017048
By clicking Submit, you consent to the personal information you provide being used in the manner as described in our Privacy Notice, including access to that information by Timken personnel who may be located outside your home country. In addition, you agree that the CAD drawings are for your personal, one-time use only, and that you will not modify or create any compilation or derivative work using the CAD drawings or distribute or display the CAD drawings on any website or other media.