Menu
Batch CAD Cart (0) ▾
  • Cart is empty
  1. Click Here for Batch Download
Request Information Add to CAD Cart
Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.
Unit of Measure

Specifications

Series

 N/A 48300

Cone Part Number

 N/A 48393

Cup Part Number

 N/A 48320-B

Design Unit

 N/A Inch

Cage Material

 N/A Stamped Steel

Related Assembly Number(s)

 N/A 48393-90026

Dimensions

d - Bore

 N/A 5.3750 in136.525 mm

D - Cup Outer Diameter

 N/A 7.5 in190.5 mm

D1 - Flange Outer Diameter

 N/A 7.7148 in195.956 mm

B - Cone Width

 N/A 1.5625 in39.688 mm

C - Cup Width

 N/A 1.3125 in33.338 mm

C1 - Cup Flange Width

 N/A 0.2188 in5.558 mm

T1 - Bearing Width to Flange

 N/A 0.4688 in11.908 mm

Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1 N/A 0.14 in3.600 mm
r - Cup Backface "To Clear" Radius2 N/A 0.130 in3.30 mm

da - Cone Frontface Backing Diameter

 N/A 5.67 in144 mm

db - Cone Backface Backing Diameter

 N/A 5.94 in151 mm

Da - Cup Frontface Backing Diameter

 N/A 7.36 in185.93 mm

Ab - Cage-Cone Frontface Clearance

 N/A 0.08 in2 mm

Aa - Cage-Cone Backface Clearance

 N/A 0.09 in2.3 mm
a - Effective Center Location3 N/A -0.16 in-4.1 mm

Basic Load Ratings

C90 - Dynamic Radial Rating (90 million revolutions)4 N/A 73300 N
C1 - Dynamic Radial Rating (1 million revolutions)5 N/A 63600 lbf283000 N

C0 - Static Radial Rating

 N/A 122000 lbf542000 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)6 N/A 9060 lbf40300 N

Factors

K - Factor7 N/A 1.82
e - ISO Factor8 N/A 0.32
Y - ISO Factor9 N/A 1.87

G1 - Heat Generation Factor (Roller-Raceway)

 N/A 404

G2 - Heat Generation Factor (Rib-Roller End)

 N/A 95.6
Cg - Geometry Factor10 N/A 0.121
  • 1 These maximum fillet radii will be cleared by the bearing corners.
  • 2 These maximum fillet radii will be cleared by the bearing corners.
  • 3 Negative value indicates effective center inside cone backface.
  • 4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 5 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 6 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 7 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 8 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 10 Geometry constant for Lubrication Life Adjustment Factor a3l.
By clicking Submit, you consent to the personal information you provide being used in the manner as described in our Privacy Notice, including access to that information by Timken personnel who may be located outside your home country. In addition, you agree that the CAD drawings are for your personal, one-time use only, and that you will not modify or create any compilation or derivative work using the CAD drawings or distribute or display the CAD drawings on any website or other media.