Menu
Batch CAD Cart (0) ▾
  • Cart is empty
  1. Click Here for Batch Download
Request Information Add to CAD Cart
  • Ball - 440C stainless steel per AMS 5630 - heat treated.
  • Optional Ball - 13-8 Mo stainless steel per AMS 5629 - heat treated. (Specify by adding suffix "C" ex.: AWC-3TC)
  • Race - 17-4PH stainless steel per AMS 5643 - heat treated.
  • Optional plating on race outside diameter can be added by adding suffix "P" for zinc nickel or cad plating or suffix "E" for zinc nickel plating (ex.: AWC-3TP/AWC-3TE)
  • PTFE Liner - (AT 3200) Permanently bonded to race inside diameter, qualified to SAE-AS81820 Type A.
  • Temperature Range: -65°F to + 325°F.
  • "K" designates Low Torque Bearing fit. No load rotational breakaway torque can be varied to meet specific application requirements.
  • Bearings can be ordered in an oversize outside diameter condition by adding suffix "D1" (.010") oversize or "D2" (.020") oversize (ex.: AWC-3TD1/AWC-3TD2)
  • Bearings listed are manufactured to conform to the dimensions, materials and configurations of SAE Specifications AS14103 (grooved) and AS14102 (plain), and are approved for procurement under these specifications.
Unit of Measure

Specifications

Part Number

 N/A AWC-6TPD2

SAE Part Number

N/A MS14102-6PU

Bearing Type

 N/A Plain

B - Ball Bore

 N/A .3750 in

D - Outside Diameter

 N/A .8325 in

W - Ball Width

 N/A .500 in

H - Race Width

 N/A .406 in

O - Ball Shoulder Diameter

 N/A .466 in

Ball Diameter

 N/A .687 in

a - Misalignment Angle

 N/A 8 º

Radial Static Limit Load Capacity

 N/A 13,700 lbs

Axial Static Limit Load Capacity

 N/A 2,630 lb

Oscillating Load

 N/A 8,310 lb

Standard Fit, No Load Rotational Breakaway Torque

 N/A .25 to 8.0 in·lb

Approximate Brg. Weight

N/A .060 lb

Options

 N/A K= Low Rotational Breakaway Torque P= Zinc Nickel or Cad Plated Race

Note

 N/A For dimensional tolerances of listed features, see the PDF version of the catalog under the View Product Catalogs tab from the home page.""
By clicking Submit, you consent to the personal information you provide being used in the manner as described in our Privacy Notice, including access to that information by Timken personnel who may be located outside your home country. In addition, you agree that the CAD drawings are for your personal, one-time use only, and that you will not modify or create any compilation or derivative work using the CAD drawings or distribute or display the CAD drawings on any website or other media.