All Product Types > INDUSTRIAL MOTION PRODUCTS > Couplings & Power Transmission Parts Catalog > S-Flex Endurance® Couplings > TR (Rear Mount) Type Flanges for use with Taper-Lock® Bushings > Part Number 68514462282  

Part Number 68514462282, TR (Rear Mount) Type Flanges for use with Taper-Lock® Bushings

    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

  • TR flanges are similar to the TF style, but allow for the Taper Lock Bushing to be mounted and removed from the reverse or serration side of the flange
  • The limited torque ratings of the Taper Lock Bushings allow TR flanges to only be used with EPDM or Neoprene sleeves
  • Different bushing sizes are used, so they have different maximum bores than the TF flanges
  • Sizes 6 through 16 are available





Specifications  · Dimensional Data  · Performance Data  · Notes

Specifications

Description 
10TR-FLNG-TAPER STD UNC THREAD

Coupling Size
10TR

Type
Coupling Flange

Material
Cast Iron

Weight
17.00 lb

Color
Gray

Bore Type
Bored to Accept 1615/1610 Taper Lock Bushing

Mount Type
Rear

Bushing Required
1615/1610

Coupling Type
S-Flex

UNC Flange UPC Number
62282


Dimensional Data

Keyway Size (W x D)
No Keyway

Hub Diameter
4.750 in
120.65 mm

Dimension L
2.690 in
68.33 mm

Outside Diameter
7.500 in
190.50 mm

Overall Length
7 in
177.80 mm

Max. Bore (Dimensions ID1/ID2)
1.620 in
42.00 mm

Dimension FL
1.220 in
30.99 mm

Dimension G
1.630 in
41.40 mm

Dimension P
1.470 in
37.34 mm

Dimension R
2.000 in
50.80 mm

Bushing Screw Size
3/8-16

Cubic inches
151.31250 in³


Performance Data

Nominal Torque (with EPDM Sleeve)
2875 in·lb

Max. Speed
3600.00 rpm

Torsional Stiffness
10980.00 in·lb/rad

Rated HP at 100 rpm
4.60 hp

Rated HP at 1,200 rpm
55.00 hp

Rated HP at 1,800 rpm
82.00 hp

Rated HP at 3,600 rpm
164.00 hp


Notes

Notes 
  • Be sure to determine if the bushing being used has either UNC threads (60°) or British Standard Whitworth B.S.W. threads (55°). In the U.S.A. the UNC type is predominant for both inch and metric bores. Outside of the U.S.A. it is most common to see B.S.W., especially on metric bores.
  • All above data refers to both standard UNC and British Standard Whitworth B.S.W. threads. Flanges are not supplied with screws.
  • Use of a 1210 or 1610 bushing reduces the reserve factor between bushing torque rating and that of the coupling.
  • Taper-Lock® is a registered trademark of Reliance Electric Industrial Company in the United States and Canada. It is a registered trademark of JH Fenner and Co. in the United Kingdom.


 MORE IMAGES 

·  S-Flex Coupling Misalignment


 DOWNLOADS 

S-Flex Endurance Catalog

S-Flex Endurance Installation Instructions
(PDF, 0KB)

S-Flex Endurance Installation Video