Batch CAD Cart (0)
  • Cart is empty
  • The same care taken in the selection of stationary pillow blocks must also be applied to selecting the proper take-up unit.
  • Load requirements should be carefully evaluated before specifying a particular take-up assembly.
  • Frame assembly and adjusting screw of TTU units are made of steel.
  • The bearing housing is cast iron. Steel or ductile iron housings are additional options.
  • Units include housing for adapter-mounted bearings only, for either fixed or float position (be sure to specify).
  • One stabilizing ring is included for fixed position assemblies.
  • Sealing is triple ring labyrinth or end closures.
  • For extremely contaminated environments, the DUSTAC seal is suggested.

Note: Speed ratings are found in dimension tables in the spherical roller bearing section.
Unit of Measure

Specifications

Diameter S-1

N/A 4 7/16 in

Travel

N/A 18 in

A

N/A 8.625 in

B

N/A 51 3/4 in

C

N/A 8.75 in

E

N/A 46.75 in

F

N/A 5 in

Bolt Size G

N/A 1 1/8 in
H1 N/A 18 7/8 in
L2 N/A 7.25 in

N

N/A 2 in

R

N/A 14.375 in

T

N/A 10 in

Bearing Number

N/A 22226K
Adapter Assembly Number3 N/A SNW-26
Stabilizing Ring 1 Req’d4 N/A SR-26-0

Triple Seal 2 Req’d

N/A LOR117
  • 1 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
  • 2 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
  • 3 Includes sleeve, locknut and lockwasher. Add shaft size to order.
  • 4 Stabilizing ring is used for fixed (FX) block; do not use for float (FL) mounting.
By clicking Submit, you consent to the personal information you provide being used in the manner as described in our Privacy Notice, including access to that information by Timken personnel who may be located outside your home country. In addition, you agree that the CAD drawings are for your personal, one-time use only, and that you will not modify or create any compilation or derivative work using the CAD drawings or distribute or display the CAD drawings on any website or other media.