CAD (0) ▾
  • Cart is empty
  1. Request CAD files
Request Information
Unit of Measure

Other Dimensions

Weight

 N/A 1.06 Kg2.34 lb

Width (T)

 N/A 2.2180 in56.337 mm

C - Width

 N/A 1.8430 in46.812 mm

Snap Ring Diameter

 N/A 3.01 in76.48 mm

Snap Ring Width

 N/A 0.09 in2.36 mm
Max Shaft Fillet Radius1 N/A 0.14 in3.56 mm
Max Housing Fillet Radius2 N/A 0.03 in0.76 mm

Shaft Backing Shoulder Diameter - Backface (db)

 N/A 1.93 in49 mm

Housing Backing Shoulder Diameter - Frontface (Da)

 N/A 2.72 in68.1 mm

Key Dimensions

Cone Part Number

 N/A 23691

Cup Part Number

 N/A 23621

Inner Spacer Part Number

 N/A K143257R

Outer Spacer Part Number

 N/A K109519R

Design Unit

 N/A Inch

Bore (d)

 N/A 1.378 in35.001 mm

O.D. (D)

 N/A 2.875 in73.025 mm
Dynamic Radial Load Rating - 90M Revs (C90) 3 N/A 5210 lbf23200 N
Dynamic Radial Load Rating 2-Row - 90M Revs (C90-2row)4 N/A 9080 lbf40400 N
K Factor 5 N/A 1.58
e Factor 6 N/A 0.37

Ratings

C1 - Dynamic Radial Rating (1 million revolutions)7 N/A 35000 lbf156000 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)8 N/A 3300 lbf14700 N

Factors

Y1 Factor 9 N/A 1.83
Y2 Factor 10 N/A 2.72
  • 1 These maximum fillet radii will be cleared by the bearing corners.
  • 2 These maximum fillet radii will be cleared by the bearing corners.
  • 3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 7 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 8 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 10 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.