This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.
Unit of Measure

Key Dimensions

Cone Part Number

 N/A LM377449H

Bore (d)

 N/A 558.8 mm22 in
Dynamic Radial Load Rating - 90M Revs (C90) 1 N/A 741000 N167000 lbf
K Factor 2 N/A 1.69

Other Dimensions

Inner Ring Width (B)

 N/A 93 mm3.6614 in
Effective Center Location3 N/A 15.8 mm0.62 in
Max Shaft Fillet Radius4 N/A 6.4 mm0.25 in

Shaft Backing Shoulder Dia. - Backface (db)

 N/A 594 mm23.39 in

Cage Location rel. to BF (Aa)

 N/A 6.9 mm0.27 in

Cage Location rel. to FF (Ab)

 N/A 10.16 mm0.4 in

Ratings

Dynamic Axial Rating - 90M Revs (Ca90)5 N/A 439000 N98800 lbf
  • 1 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 2 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 3 Negative value indicates effective center inside cone backface.
  • 4 These maximum fillet radii will be cleared by the bearing corners.
  • 5 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.