Menu
Batch CAD Cart (0) ▾
  • Cart is empty
  1. Click Here for Batch Download
This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.
Unit of Measure

Specifications

Design Units

 Imperial
C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1 16900 lbf75300 N
C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2 4390 lbf19500 N

Dimensions

d - Cone Bore

 0.9835 in24.981 mm

B - Cone Width

 0.78125 in19.844 mm

Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius3 0.06 in1.5 mm

db - Cone Backface Backing Diameter

 1.30 in33.0 mm

Ab - Cage-Cone Frontface Clearance

 -0.0390625 in-0.9922 mm

Aa - Cage-Cone Backface Clearance

 0.078125 in1.9844 mm
a - Effective Center Location4 -0.14 in-3.6 mm

Basic Load Ratings

C90 - Dynamic Radial Rating (90 million revolutions)5 2520 lbf11200 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)6 1650 lbf7340 N

Factors

K - Factor7 1.53
  • 1 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 2 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 3 These maximum fillet radii will be cleared by the bearing corners.
  • 4 Negative value indicates effective center inside cone backface.
  • 5 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 6 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 7 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.