Part Number 14282, Tapered Roller Bearings - Single Cups

This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.

RELATED PRODUCTS

Unit of Measure

Key Dimensions | Other Dimensions | Factors

Key Dimensions

Cup Part Number	N/A 14282
O.D. (D)	N/A 2.8345 in71.996 mm
Outer Ring Width (C)	N/A 0.5918 in15.032 mm
e Factor ¹	N/A 0.38
Y Factor ²	N/A 1.57

Other Dimensions

Weight	N/A 0.4 Kg0.8 lb
Max Housing Fillet Radius³	N/A 0.06 in1.52 mm
Housing Backing Shoulder Dia. - Frontface (Da)	N/A 2.60 in66.00 mm
Housing Backing Shoulder Dia. - Backface (Db)	N/A 2.44 in61.98 mm

Factors

Geometry Factor (Cg)⁴

N/A 0.0668

¹ These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
² These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
³ These maximum fillet radii will be cleared by the bearing corners.
⁴ Geometry constant for Lubrication Life Adjustment Factor a3l.

Email ^*
First Name ^*
Last Name ^*
Company ^*
Department ^*
Country ^*
Zip/Postal Code ^*
Phone Number

Key Dimensions

Cup Part Number

O.D. (D)

Outer Ring Width (C)

Other Dimensions

Weight

Housing Backing Shoulder Dia. - Frontface (Da)

Housing Backing Shoulder Dia. - Backface (Db)

Factors