Part Number 362AX, Tapered Roller Bearings - Single Cups

This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.

RELATED PRODUCTS

Unit of Measure

Key Dimensions | Other Dimensions | Factors

Key Dimensions

Cup Part Number	N/A 362AX
O.D. (D)	N/A 3.500 in88.9 mm
Outer Ring Width (C)	N/A 0.7751 in19.688 mm
e Factor ¹	N/A 0.32
Y Factor ²	N/A 1.88

Other Dimensions

Weight	N/A 0.5 Kg1.2 lb
Max Housing Fillet Radius³	N/A 0.050 in1.27 mm
Housing Backing Shoulder Dia. - Frontface (Da)	N/A 3.34 in84.10 mm
Housing Backing Shoulder Dia. - Backface (Db)	N/A 3.15 in80.01 mm

Factors

Geometry Factor (Cg)⁴

N/A 0.0773

¹ These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
² These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
³ These maximum fillet radii will be cleared by the bearing corners.
⁴ Geometry constant for Lubrication Life Adjustment Factor a3l.

Email ^*
First Name ^*
Last Name ^*
Company ^*
Department ^*
Country ^*
Zip/Postal Code ^*
Phone Number

Key Dimensions

Cup Part Number

O.D. (D)

Outer Ring Width (C)

Other Dimensions

Weight

Housing Backing Shoulder Dia. - Frontface (Da)

Housing Backing Shoulder Dia. - Backface (Db)

Factors