This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.
RELATED PRODUCTS
RELATED PRODUCTS
RELATED PRODUCTS
Unit of Measure
Key Dimensions
Cup Part Number |
N/A 48620 |
O.D. (D) |
N/A 7.875 in200.025 mm |
Outer Ring Width (C) |
N/A 1.3437 in34.13 mm |
| e Factor 1 | N/A 0.34 |
| K Factor 2 | N/A 1.74 |
- 1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
- 2 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
- 3 These maximum fillet radii will be cleared by the bearing corners.