Part Number 5535V, Tapered Roller Bearings - Single Cups

This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.

RELATED PRODUCTS

Unit of Measure

Key Dimensions | Other Dimensions | Factors

Key Dimensions

Cup Part Number	N/A 5535V
O.D. (D)	N/A 4.8125 in122.238 mm
Outer Ring Width (C)	N/A 1.4375 in36.513 mm
e Factor ¹	N/A 0.36
Y Factor ²	N/A 1.67

Other Dimensions

Weight	N/A 2.3 Kg5.1 lb
Max Housing Fillet Radius³	N/A 0.130 in3.30 mm
Housing Backing Shoulder Dia. - Frontface (Da)	N/A 4.6 in116.1 mm
Housing Backing Shoulder Dia. - Backface (Db)	N/A 4.17 in105.92 mm

Factors

Geometry Factor (Cg)⁴

N/A 0.0825

¹ These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
² These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
³ These maximum fillet radii will be cleared by the bearing corners.
⁴ Geometry constant for Lubrication Life Adjustment Factor a3l.

Email ^*
First Name ^*
Last Name ^*
Company ^*
Department ^*
Country ^*
Zip/Postal Code ^*
Phone Number

Key Dimensions

Cup Part Number

O.D. (D)

Outer Ring Width (C)

Other Dimensions

Weight

Housing Backing Shoulder Dia. - Frontface (Da)

Housing Backing Shoulder Dia. - Backface (Db)

Factors