This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.

RELATED PRODUCTS

RELATED PRODUCTS

RELATED PRODUCTS

Unit of Measure

Key Dimensions

Cup Part Number

 N/A DX252051

O.D. (D)

 N/A 12.5000 in317.500 mm

Outer Ring Width (C)

 N/A 1.8125 in46.038 mm
e Factor 1 N/A 0.52
Y Factor 2 N/A 1.15

Other Dimensions

Weight

 N/A 16.700 Kg36.8 lb
Max Housing Fillet Radius3 N/A 0.130 in3.30 mm

Housing Backing Shoulder Dia. - Frontface (Da)

 N/A 11.84 in300.00 mm

Housing Backing Shoulder Dia. - Backface (Db)

 N/A 11.26 in286.00 mm

Factors

Geometry Factor (Cg)4 N/A 0.146
  • 1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 2 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 3 These maximum fillet radii will be cleared by the bearing corners.
  • 4 Geometry constant for Lubrication Life Adjustment Factor a3l.