This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.

RELATED PRODUCTS

Unit of Measure

Key Dimensions

Cup Part Number

 N/A LL889010

O.D. (D)

 N/A 56.5000 in1435.100 mm

Outer Ring Width (C)

 N/A 1.8750 in47.625 mm
e Factor 1 N/A 0.57
Y Factor 2 N/A 1.05

Other Dimensions

Weight

 N/A 147.100 Kg324.30 lb
Max Housing Fillet Radius3 N/A 0.250 in6.35 mm

Housing Backing Shoulder Dia. - Frontface (Da)

 N/A 55.31 in1404.90 mm

Housing Backing Shoulder Dia. - Backface (Db)

 N/A 54.92 in1394.97 mm

Factors

Geometry Factor (Cg)4 N/A 0.464
  • 1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 2 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 3 These maximum fillet radii will be cleared by the bearing corners.
  • 4 Geometry constant for Lubrication Life Adjustment Factor a3l.