COMPANY HEADER
CAD (0) ▾
  • Cart is empty
  1. Request CAD files
Terms
Request Information Add to CAD Cart
This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.
Unit of Measure

Specifications

Series

 N/A LM763500

Cup Part Number

 N/A LM763514X

Design Units

 N/A Imperial

Note

 N/A This part has a non-standard shoulder design. Please email customer CAD for shoulder details to ensure the proper design of mating components.

Dimensions

D - Cup Outer Diameter

 N/A 19.0000 in482.600 mm

C - Cup Width

 N/A 2.1764 in55.281 mm

Abutment and Fillet Dimensions

Db - Cup Backface Backing Diameter

 N/A 17.72 in450.10 mm

Factors

K - Factor1 N/A 1.29
e - ISO Factor2 N/A 0.99
  • 1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 2 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.