COMPANY HEADER
CAD (0) ▾
  • Cart is empty
  1. Request CAD files
Terms
Request Information Add to CAD Cart
This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.
Unit of Measure

Specifications

Series

 N/A LM300800

Cup Part Number

 N/A JLM300816

Design Units

 N/A METRIC

Dimensions

D - Cup Outer Diameter

 N/A 78 mm3.0709 in

C - Cup Width

 N/A 13.500 mm0.5315 in

Abutment and Fillet Dimensions

r - Cup Backface "To Clear" Radius1 N/A 0.25 mm0.010 in

Da - Cup Frontface Backing Diameter

 N/A 69.10 mm2.74 in

Db - Cup Backface Backing Diameter

 N/A 67.06 mm2.64 in

Factors

K - Factor2 N/A 1.68
e - ISO Factor3 N/A 0.35
Y - ISO Factor4 N/A 1.72

G1 - Heat Generation Factor (Roller-Raceway)

 N/A 22.5

G2 - Heat Generation Factor (Rib-Roller End)

 N/A 18.1
  • 1 These maximum fillet radii will be cleared by the bearing corners.
  • 2 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 4 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.