This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.

RELATED PRODUCTS

Unit of Measure

Key Dimensions

O.D. (D)

 N/A 115 mm4.5276 in

Cup Part Number

 N/A JLM714110
e Factor 1 N/A 0.46
K Factor 2 N/A 1.27
Y Factor 3 N/A 1.31

Other Dimensions

Weight

 N/A 0.9 Kg1.9 lb

C - Cup Width

 N/A 19.000 mm0.7480 in
Max Housing Fillet Radius4 N/A 2.54 mm0.1 in

Housing Backing Shoulder Dia. - Frontface (Da)

 N/A 111.00 mm4.37 in

Housing Backing Shoulder Dia. - Backface (Db)

 N/A 103.89 mm4.09 in

Factors

G1 Factor

 N/A 76.3

G2 Factor

 N/A 33.7
Geometry Factor (Cg)5 N/A 0.114
  • 1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 2 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 4 These maximum fillet radii will be cleared by the bearing corners.
  • 5 Geometry constant for Lubrication Life Adjustment Factor a3l.