This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.

RELATED PRODUCTS

Unit of Measure

Key Dimensions

O.D. (D)

 N/A 440 mm17.3228 in

Cup Part Number

 N/A Y32248
e Factor 1 N/A 0.44
K Factor 2 N/A 1.34
Y Factor 3 N/A 1.38

Other Dimensions

Weight

 N/A 81.12 Kg178.85 lb

C - Cup Width

 N/A 100 mm3.937 in
Max Housing Fillet Radius4 N/A 4 mm0.16 in

Housing Backing Shoulder Dia. - Frontface (Da)

 N/A 415 mm16.34 in

Housing Backing Shoulder Dia. - Backface (Db)

 N/A 394 mm15.51 in

Factors

G1 Factor

 N/A 2021.3

G2 Factor

 N/A 103
Geometry Factor (Cg)5 N/A 0.18
  • 1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 2 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 4 These maximum fillet radii will be cleared by the bearing corners.
  • 5 Geometry constant for Lubrication Life Adjustment Factor a3l.