Part Number 332-B, Tapered Roller Bearings - Single Flanged Cups

Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.

RELATED PRODUCTS

Unit of Measure

Key Dimensions | Other Dimensions | Factors

Key Dimensions

Cup Part Number	N/A 332-B
O.D. (D)	N/A 3.1496 in80 mm
Outer Ring Width (C)	N/A 0.7018 in17.826 mm
e Factor ¹	N/A 0.27
K Factor ²	N/A 2.14
Y Factor ³	N/A 2.2

Other Dimensions

Weight	N/A 0.6 Kg1.4 lb
Outer Ring Flange O.D.(D1)	N/A 3.3330 in84.658 mm
Outer Ring Flange Width (C2)	N/A 0.1875 in4.763 mm
Max Housing Fillet Radius⁴	N/A 0.03 in0.8 mm
Housing Backing Shoulder Dia. - Frontface (Da)	N/A 3.05 in77.47 mm

Factors

Geometry Factor (Cg)⁵

N/A 0.0676

¹ These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
² These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
³ These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
⁴ These maximum fillet radii will be cleared by the bearing corners.
⁵ Geometry constant for Lubrication Life Adjustment Factor a3l.

Email ^*
First Name ^*
Last Name ^*
Company ^*
Department ^*
Country ^*
Zip/Postal Code ^*
Phone Number

Key Dimensions

Cup Part Number

O.D. (D)

Outer Ring Width (C)

Other Dimensions

Weight

Outer Ring Flange O.D.(D1)

Outer Ring Flange Width (C2)

Housing Backing Shoulder Dia. - Frontface (Da)

Factors