Menu
Batch CAD Cart (0) ▾
  • Cart is empty
  1. Click Here for Batch Download
Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.
Unit of Measure

Specifications

Series

 59000

Cup Part Number

 59414-B

Design Units

 Imperial

Dimensions

D - Cup Outer Diameter

 4.1250 in104.775 mm

D1 - Flange Outer Diameter

 4.6063 in117.000 mm

C - Cup Width

 1.125 in28.575 mm

C1 - Cup Flange Width

 0.1563 in3.970 mm

Abutment and Fillet Dimensions

r - Cup Backface "To Clear" Radius1 0.130 in3.30 mm

Da - Cup Frontface Backing Diameter

 4.02 in102.10 mm

Factors

K - Factor2 1.45
e - ISO Factor3 0.4
Y - ISO Factor4 1.49
Cg - Geometry Factor5 0.0999
  • 1 These maximum fillet radii will be cleared by the bearing corners.
  • 2 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 4 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 5 Geometry constant for Lubrication Life Adjustment Factor a3l.