3D CAD and 2D Drawings

Find and download 3D CAD and 2D drawings for key Timken products.

Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.
Unit of Measure

Specifications

Series

N/A A2000

Cup Part Number

N/A A2126-B

Design Units

N/A Imperial

Dimensions

D - Cup Outer Diameter

N/A 1.2595 in31.991 mm

D1 - Flange Outer Diameter

N/A 1.3845 in35.166 mm

C - Cup Width

N/A 0.3125 in7.938 mm

C1 - Cup Flange Width

N/A 0.0940 in2.388 mm

Abutment and Fillet Dimensions

r - Cup Backface "To Clear" Radius1 N/A 0.050 in1.30 mm

Da - Cup Frontface Backing Diameter

N/A 1.24 in31.50 mm

Factors

K - Factor2 N/A 1.44
e - ISO Factor3 N/A 0.41
Y - ISO Factor4 N/A 1.48
Cg - Geometry Factor5 N/A 0.0308
  • 1 These maximum fillet radii will be cleared by the bearing corners.
  • 2 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 4 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 5 Geometry constant for Lubrication Life Adjustment Factor a3l.
By clicking Submit, you consent to the personal information you provide being accessible by Timken personnel, who may be located outside your home country, as described in our Privacy Notice.