Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.

RELATED PRODUCTS

Unit of Measure

Key Dimensions

Cup Part Number

 N/A JLM722912-B

O.D. (D)

 N/A 165 mm6.4961 in

Outer Ring Width (C)

 N/A 21 mm0.8268 in
e Factor 1 N/A 0.46
K Factor 2 N/A 1.27
Y Factor 3 N/A 1.31

Other Dimensions

Weight

 N/A 1.80 Kg6.7717 lb

Outer Ring Flange O.D.(D1)

 N/A 172.000 mm6.7717 in

Outer Ring Flange Width (C2)

 N/A 5.500 mm0.2165 in
Max Housing Fillet Radius4 N/A 3 mm0.12 in

Housing Backing Shoulder Dia. - Frontface (Da)

 N/A 160.02 mm6.34 in

Factors

G1 Factor

 N/A 161

G2 Factor

 N/A 57.2
Geometry Factor (Cg)5 N/A 0.145
  • 1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 2 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 4 These maximum fillet radii will be cleared by the bearing corners.
  • 5 Geometry constant for Lubrication Life Adjustment Factor a3l.