Menu
Batch CAD Cart (0) ▾
  • Cart is empty
  1. Click Here for Batch Download
Request Information Add to CAD Cart
This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.
Unit of Measure

Specifications

Series

 N/A 00000

Cone Part Number

 N/A 00050

Cup Part Number

 N/A 00162X

Design Unit

 N/A Inch

Cage Material

 N/A Stamped Steel

Dimensions

d - Bore

 N/A 0.5000 in12.7 mm

D - Cup Outer Diameter

 N/A 1.6260 in41.300 mm

B - Cone Width

 N/A 0.5540 in14.072 mm

C - Cup Width

 N/A 0.5625 in14.288 mm

T - Bearing Width

 N/A 0.5501 in13.973 mm

Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1 N/A 0.06 in1.5 mm
r - Cup Backface "To Clear" Radius2 N/A 0.010 in0.25 mm

da - Cone Frontface Backing Diameter

 N/A 0.65 in16.5 mm

db - Cone Backface Backing Diameter

 N/A 0.75 in19 mm

Da - Cup Frontface Backing Diameter

 N/A 1.44 in36.58 mm

Db - Cup Backface Backing Diameter

 N/A 1.36 in34.54 mm

Ab - Cage-Cone Frontface Clearance

 N/A 0.08 in2 mm

Aa - Cage-Cone Backface Clearance

 N/A -0.03 in-0.8 mm
a - Effective Center Location3 N/A -0.2 in-5.1 mm

Basic Load Ratings

C90 - Dynamic Radial Rating (90 million revolutions)4 N/A 1220 lbf5410 N
C1 - Dynamic Radial Rating (1 million revolutions)5 N/A 4690 lbf20900 N

C0 - Static Radial Rating

 N/A 3840 lbf17100 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)6 N/A 574 lbf2550 N

Factors

K - Factor7 N/A 2.12
e - ISO Factor8 N/A 0.28
Y - ISO Factor9 N/A 2.18
Cg - Geometry Factor10 N/A 0.033
  • 1 These maximum fillet radii will be cleared by the bearing corners.
  • 2 These maximum fillet radii will be cleared by the bearing corners.
  • 3 Negative value indicates effective center inside cone backface.
  • 4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 5 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 6 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 7 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 8 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 10 Geometry constant for Lubrication Life Adjustment Factor a3l.
By clicking Submit, you consent to the personal information you provide being used in the manner as described in our Privacy Notice, including access to that information by Timken personnel who may be located outside your home country. In addition, you agree that the CAD drawings are for your personal, one-time use only, and that you will not modify or create any compilation or derivative work using the CAD drawings or distribute or display the CAD drawings on any website or other media.