Menu
Batch CAD Cart (0) ▾
  • Cart is empty
  1. Click Here for Batch Download
Request Information Add to CAD Cart
This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.
Unit of Measure

Specifications

Series

 N/A 21000

Cone Part Number

 N/A 21075

Cup Part Number

 N/A 21212

Design Unit

 N/A Inch

Cage Material

 N/A Stamped Steel

Related Assembly Number(s)

 N/A 21075-90010 21075-90011 21075-90025 21075-90026 21075-902A3

Dimensions

d - Bore

 N/A 3/4 in19.05 mm

D - Cup Outer Diameter

 N/A 2.1250 in53.975 mm

B - Cone Width

 N/A 0.8598 in21.839 mm

C - Cup Width

 N/A 0.6250 in15.875 mm

T - Bearing Width

 N/A 0.8750 in22.225 mm

Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1 N/A 0.06 in1.5 mm
r - Cup Backface "To Clear" Radius2 N/A 0.090 in2.29 mm

da - Cone Frontface Backing Diameter

 N/A 1.03 in26 mm

db - Cone Backface Backing Diameter

 N/A 1.24 in31.5 mm

Da - Cup Frontface Backing Diameter

 N/A 2.01 in51.05 mm

Db - Cup Backface Backing Diameter

 N/A 1.69 in42.93 mm

Ab - Cage-Cone Frontface Clearance

 N/A 0.09 in2.3 mm

Aa - Cage-Cone Backface Clearance

 N/A 0.1 in2.5 mm
a - Effective Center Location3 N/A -0.23 in-5.8 mm

Basic Load Ratings

C90 - Dynamic Radial Rating (90 million revolutions)4 N/A 3210 lbf14300 N
C1 - Dynamic Radial Rating (1 million revolutions)5 N/A 12400 lbf55100 N

C0 - Static Radial Rating

 N/A 9560 lbf42500 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)6 N/A 3250 lbf14400 N

Factors

K - Factor7 N/A 0.99
e - ISO Factor8 N/A 0.59
Y - ISO Factor9 N/A 1.02

G1 - Heat Generation Factor (Roller-Raceway)

 N/A 7

G2 - Heat Generation Factor (Rib-Roller End)

 N/A 3.55
Cg - Geometry Factor10 N/A 0.0558
  • 1 These maximum fillet radii will be cleared by the bearing corners.
  • 2 These maximum fillet radii will be cleared by the bearing corners.
  • 3 Negative value indicates effective center inside cone backface.
  • 4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 5 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 6 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 7 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 8 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 10 Geometry constant for Lubrication Life Adjustment Factor a3l.
By clicking Submit, you consent to the personal information you provide being used in the manner as described in our Privacy Notice, including access to that information by Timken personnel who may be located outside your home country. In addition, you agree that the CAD drawings are for your personal, one-time use only, and that you will not modify or create any compilation or derivative work using the CAD drawings or distribute or display the CAD drawings on any website or other media.