Menu
Batch CAD Cart (0) ▾
  • Cart is empty
  1. Click Here for Batch Download
Request Information Add to CAD Cart
This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.
Unit of Measure

Specifications

Series

 N/A 22000

Cone Part Number

 N/A 22168

Cup Part Number

 N/A 22325

Design Unit

 N/A Inch

Cage Material

 N/A Stamped Steel

Related Assembly Number(s)

 N/A 22168-90010

Dimensions

d - Bore

 N/A 1 11/16 in42.863 mm

D - Cup Outer Diameter

 N/A 3.2500 in82.550 mm

B - Cone Width

 N/A 0.7810 in19.837 mm

C - Cup Width

 N/A 0.5937 in15.080 mm

T - Bearing Width

 N/A 0.7812 in19.842 mm

Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1 N/A 0.09 in2.300 mm
r - Cup Backface "To Clear" Radius2 N/A 0.06 in1.52 mm

da - Cone Frontface Backing Diameter

 N/A 1.91 in48.5 mm

db - Cone Backface Backing Diameter

 N/A 2.05 in52 mm

Da - Cup Frontface Backing Diameter

 N/A 3.03 in76.96 mm

Db - Cup Backface Backing Diameter

 N/A 2.87 in72.90 mm

Ab - Cage-Cone Frontface Clearance

 N/A 0.1 in2.5 mm

Aa - Cage-Cone Backface Clearance

 N/A 0.02 in0.5 mm
a - Effective Center Location3 N/A -0.1 in-2.5 mm

Basic Load Ratings

C90 - Dynamic Radial Rating (90 million revolutions)4 N/A 4510 lbf20100 N
C1 - Dynamic Radial Rating (1 million revolutions)5 N/A 17400 lbf77400 N

C0 - Static Radial Rating

 N/A 16500 lbf73200 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)6 N/A 3320 lbf14800 N

Factors

K - Factor7 N/A 1.36
e - ISO Factor8 N/A 0.43
Y - ISO Factor9 N/A 1.39

G1 - Heat Generation Factor (Roller-Raceway)

 N/A 23.7

G2 - Heat Generation Factor (Rib-Roller End)

 N/A 14.4
Cg - Geometry Factor10 N/A 0.0758
  • 1 These maximum fillet radii will be cleared by the bearing corners.
  • 2 These maximum fillet radii will be cleared by the bearing corners.
  • 3 Negative value indicates effective center inside cone backface.
  • 4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 5 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 6 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 7 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 8 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 10 Geometry constant for Lubrication Life Adjustment Factor a3l.
By clicking Submit, you consent to the personal information you provide being used in the manner as described in our Privacy Notice, including access to that information by Timken personnel who may be located outside your home country. In addition, you agree that the CAD drawings are for your personal, one-time use only, and that you will not modify or create any compilation or derivative work using the CAD drawings or distribute or display the CAD drawings on any website or other media.