Menu
Batch CAD Cart (0) ▾
  • Cart is empty
  1. Click Here for Batch Download
This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.
Unit of Measure

Specifications

Series

 535

Cone Part Number

 539

Cup Part Number

 532

Design Unit

 Inch

Cage Material

 Stamped Steel

Dimensions

d - Bore

 2.1250 in53.975 mm

D - Cup Outer Diameter

 4.3750 in111.125 mm

B - Cone Width

 1.4550 in36.957 mm

C - Cup Width

 1.3125 in33.338 mm

T - Bearing Width

 1.5001 in38.103 mm

Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1 0.14 in3.600 mm
r - Cup Backface "To Clear" Radius2 0.130 in3.30 mm

da - Cone Frontface Backing Diameter

 2.4 in61 mm

db - Cone Backface Backing Diameter

 2.68 in68 mm

Da - Cup Frontface Backing Diameter

 3.96 in100.10 mm

Db - Cup Backface Backing Diameter

 3.74 in95.00 mm

Ab - Cage-Cone Frontface Clearance

 0.07 in1.8 mm

Aa - Cage-Cone Backface Clearance

 0.08 in2 mm
a - Effective Center Location3 -0.48 in-12.2 mm

Basic Load Ratings

C90 - Dynamic Radial Rating (90 million revolutions)4 11900 lbf52900 N
C1 - Dynamic Radial Rating (1 million revolutions)5 45900 lbf204000 N

C0 - Static Radial Rating

 46200 lbf206000 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)6 6040 lbf26800 N

Factors

K - Factor7 1.97
e - ISO Factor8 0.3
Y - ISO Factor9 2.02

G1 - Heat Generation Factor (Roller-Raceway)

 64.3

G2 - Heat Generation Factor (Rib-Roller End)

 16.1
Cg - Geometry Factor10 0.0938
  • 1 These maximum fillet radii will be cleared by the bearing corners.
  • 2 These maximum fillet radii will be cleared by the bearing corners.
  • 3 Negative value indicates effective center inside cone backface.
  • 4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 5 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 6 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 7 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 8 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 10 Geometry constant for Lubrication Life Adjustment Factor a3l.