Menu
Batch CAD Cart (0) ▾
  • Cart is empty
  1. Click Here for Batch Download
Request Information Add to CAD Cart
This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.
Unit of Measure

Specifications

Series

 N/A 132000

Cone Part Number

 N/A EE132084

Cup Part Number

 N/A 132125

Design Unit

 N/A Inch

Cage Material

 N/A Stamped Steel

Dimensions

d - Bore

 N/A 8.1250 in206.375 mm

D - Cup Outer Diameter

 N/A 12.5000 in317.500 mm

B - Cone Width

 N/A 2.125 in53.975 mm

C - Cup Width

 N/A 1.3750 in34.925 mm

T - Bearing Width

 N/A 2.1250 in53.975 mm

Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1 N/A 0.16 in4.1 mm
r - Cup Backface "To Clear" Radius2 N/A 0.130 in3.30 mm

da - Cone Frontface Backing Diameter

 N/A 8.66 in220 mm

db - Cone Backface Backing Diameter

 N/A 8.94 in227.1 mm

Da - Cup Frontface Backing Diameter

 N/A 11.57 in293.88 mm

Db - Cup Backface Backing Diameter

 N/A 11.57 in293.88 mm

Ab - Cage-Cone Frontface Clearance

 N/A 0.17 in4.3 mm

Aa - Cage-Cone Backface Clearance

 N/A 0.39 in9.9 mm
a - Effective Center Location3 N/A -0.24 in-6.1 mm

Basic Load Ratings

C90 - Dynamic Radial Rating (90 million revolutions)4 N/A 30800 lbf137000 N
C1 - Dynamic Radial Rating (1 million revolutions)5 N/A 119000 lbf528000 N

C0 - Static Radial Rating

 N/A 202000 lbf900000 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)6 N/A 16500 lbf73400 N

Factors

K - Factor7 N/A 1.86
e - ISO Factor8 N/A 0.31
Y - ISO Factor9 N/A 1.91

G1 - Heat Generation Factor (Roller-Raceway)

 N/A 797.8

G2 - Heat Generation Factor (Rib-Roller End)

 N/A 124.6
Cg - Geometry Factor10 N/A 0.117
  • 1 These maximum fillet radii will be cleared by the bearing corners.
  • 2 These maximum fillet radii will be cleared by the bearing corners.
  • 3 Negative value indicates effective center inside cone backface.
  • 4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 5 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 6 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 7 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 8 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 10 Geometry constant for Lubrication Life Adjustment Factor a3l.
By clicking Submit, you consent to the personal information you provide being used in the manner as described in our Privacy Notice, including access to that information by Timken personnel who may be located outside your home country. In addition, you agree that the CAD drawings are for your personal, one-time use only, and that you will not modify or create any compilation or derivative work using the CAD drawings or distribute or display the CAD drawings on any website or other media.