Activated later
Unit of Measure

Key Dimensions

UPC

 N/A 0013992404572

Cone Part Number

 N/A GH916642

Cup Part Number

 N/A GH916610

Bore (d)

 N/A 2.7554 in69.987 mm

O.D. (D)

 N/A 6.9375 in176.213 mm

Width (T)

 N/A 2.1563 in54.770 mm
Dynamic Radial Load Rating - 1M Revs (C1)1 N/A 82200 lbf366000 N
Dynamic Radial Load Rating - 90M Revs (C90) 2 N/A 21300 lbf94800 N
e Factor3 N/A 0.7
K Factor4 N/A 0.84
Y Factor 5 N/A 0.86

Other Dimensions

Weight

 N/A 13.90 lb6.30 Kg

Inner Ring Width (B)

 N/A 2.0938 in53.183 mm

Outer Ring Width (C)

 N/A 1.4375 in36.513 mm
Effective Center Location6 N/A -0.08 in-2 mm
Max Shaft Fillet Radius7 N/A 0.13 in3.300 mm
Max Housing Fillet Radius8 N/A 0.130 in3.30 mm

Shaft Backing Shoulder Dia. - Frontface (da)

 N/A 3.74 in95 mm

Shaft Backing Shoulder Dia. - Backface (db)

 N/A 4.06 in103 mm

Housing Backing Shoulder Dia. - Frontface (Da)

 N/A 6.48 in164.10 mm

Housing Backing Shoulder Dia. - Backface (Db)

 N/A 5.79 in147.07 mm

Cage Location rel. to BF (Aa)

 N/A 0.31 in7.9 mm

Cage Location rel. to FF (Ab)

 N/A 0.16 in4.1 mm

Ratings

Dynamic Axial Rating - 90M Revs (Ca90)9 N/A 25500 lbf114000 N

Static Radial Load Rating (C0)

 N/A 96900 lbf431000 N

Factors

G1 Factor

 N/A 133

G2 Factor

 N/A 18.7
Geometry Factor (Cg)10 N/A 0.107
  • 1 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 2 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 4 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 Negative value indicates effective center inside cone backface.
  • 7 These maximum fillet radii will be cleared by the bearing corners.
  • 8 These maximum fillet radii will be cleared by the bearing corners.
  • 9 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 10 Geometry constant for Lubrication Life Adjustment Factor a3l.