Activated later
Unit of Measure

Key Dimensions

UPC

 N/A 0053893656175

Cone Part Number

 N/A GL630349C

Cup Part Number

 N/A GL630310

Bore (d)

 N/A 6.0000 in152.400 mm

O.D. (D)

 N/A 7.5625 in192.088 mm

Width (T)

 N/A 0.9843 in25.001 mm
Dynamic Radial Load Rating - 1M Revs (C1)1 N/A 32000 lbf143000 N
Dynamic Radial Load Rating - 90M Revs (C90) 2 N/A 8310 lbf37000 N
e Factor3 N/A 0.42
K Factor4 N/A 1.4
Y Factor 5 N/A 1.44

Other Dimensions

Weight

 N/A 3.4 lb1.60 Kg

Inner Ring Width (B)

 N/A 0.9449 in24.000 mm

Outer Ring Width (C)

 N/A 0.7480 in18.999 mm
Effective Center Location6 N/A 0.4 in10.2 mm
Max Shaft Fillet Radius7 N/A 0.080 in2.0 mm
Max Housing Fillet Radius8 N/A 0.08 in2 mm

Shaft Backing Shoulder Dia. - Frontface (da)

 N/A 6.22 in158 mm

Shaft Backing Shoulder Dia. - Backface (db)

 N/A 6.38 in162 mm

Housing Backing Shoulder Dia. - Frontface (Da)

 N/A 7.40 in187.96 mm

Housing Backing Shoulder Dia. - Backface (Db)

 N/A 7.20 in182.88 mm

Cage Location rel. to BF (Aa)

 N/A 0.06 in1.5 mm

Cage Location rel. to FF (Ab)

 N/A 0.13 in3.3 mm

Ratings

Dynamic Axial Rating - 90M Revs (Ca90)9 N/A 5920 lbf26300 N

Static Radial Load Rating (C0)

 N/A 62200 lbf277000 N

Factors

G1 Factor

 N/A 293

G2 Factor

 N/A 164
Geometry Factor (Cg)10 N/A 0.17
  • 1 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 2 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 4 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 Negative value indicates effective center inside cone backface.
  • 7 These maximum fillet radii will be cleared by the bearing corners.
  • 8 These maximum fillet radii will be cleared by the bearing corners.
  • 9 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 10 Geometry constant for Lubrication Life Adjustment Factor a3l.